OP-TEE is a Trusted Execution Environment (TEE) designed as companion to a non-secure Linux kernel running on Arm; Cortex-A cores using the TrustZone technology. Starting in version 3.21.0 and prior to version 4.11.0, the ARM Crypto Extensions accelerated SHA-3 implementation has an off-by-one error that can cause a massive heap overflow that corrupts all TEE kernel memory following the hash state. This affects all platforms built with `CFG_CRYPTO_WITH_CE82=y` (ARMv8.2+ with SHA3 Crypto Extensions). Version 4.11.0 contains a patch. As a workaround, disable SHA3 Crypto Extensions with `CFG_CRYPTO_WITH_CE82=n`.

Improper Input Validation vulnerability in Apache Camel Cometd Component. The camel-cometd component maps inbound Bayeux (CometD) message headers into the Camel Exchange without applying a HeaderFilterStrategy. CometdBinding.populateExchangeFromMessage copies the entire ext.CamelHeaders map supplied by the CometD client directly onto the Camel message (message.setHeaders), so any header name - including Camel-internal control headers such as CamelHttpUri, CamelFileName or CamelJmsDestinationName - is accepted unmodified. Because a CometdComponent installs no Bayeux SecurityPolicy by default, any client that can complete the Bayeux handshake against the CometD endpoint can publish such a message without authentication. An attacker can therefore inject arbitrary Camel control headers that influence the behaviour of downstream producers in the route (for example redirecting an HTTP producer, changing a file name, or overriding a JMS destination); the injected headers also persist across internal direct, seda and vm hops. The concrete downstream impact depends on which producers the route uses. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix implements a HeaderFilterStrategy in the camel-cometd binding (a long-standing TODO in the code) that filters the Camel header namespace case-insensitively on inbound mapping, so client-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from inbound CometD messages before they reach any downstream producer (for example removeHeaders('Camel*') and removeHeaders('camel*') at the start of the route), and install an explicit Bayeux SecurityPolicy on the CometdComponent so that only authenticated clients can publish.

Deserialization of Untrusted Data vulnerability in Apache Camel. The camel-vertx-http component deserializes HTTP response bodies carrying the Content-Type application/x-java-serialized-object using a raw java.io.ObjectInputStream, without applying any ObjectInputFilter (VertxHttpHelper.deserializeJavaObjectFromStream) This deserialization path is reached only when the producer endpoint is configured with transferException=true (or the component-level allowJavaSerializedObject=true) and throwExceptionOnFailure is left at its default value of true; in that case a backend HTTP response with a 5xx status and the application/x-java-serialized-object content type has its body deserialized with no class restrictions. An attacker who controls the backend the Camel producer talks to - through a man-in-the-middle position on an unencrypted (plain HTTP) connection, or by compromising the backend service - can return a crafted serialized Java object and, if a suitable gadget chain is present on the classpath, achieve remote code execution on the Camel application host. The path is not reachable in the default configuration, where transferException is false. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.20.0. Users are recommended to upgrade to version 4.20.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, the deserialization performed by both helper utilities is constrained by a default ObjectInputFilter (allow-list java.**;javax.**;org.apache.camel.**;!*), which can be customised through the new deserializationFilter endpoint option or the JVM-wide -Djdk.serialFilter system property. For deployments that cannot upgrade immediately: do not enable transferException=true (or allowJavaSerializedObject=true) on producers that talk to untrusted or network-reachable backends; ensure producer connections use TLS (https) so that a response cannot be substituted by a man-in-the-middle; and, where the option is required, set an explicit -Djdk.serialFilter allow-list (for example java.**;org.apache.camel.**;!*) to constrain deserialization.

Improper Input Validation, Exposure of Sensitive Information to an Unauthorized Actor, Server-Side Request Forgery (SSRF) vulnerability in Apache Camel in Iggy component. The camel-iggy consumer mapped the user-headers of inbound Iggy messages into the Camel Exchange header map without applying any HeaderFilterStrategy (IggyFetchRecords copied the message user-headers straight into the Exchange). Because nothing blocked the Camel header namespace, an actor able to publish to the consumed Iggy stream/topic could set Camel-internal control headers - including CamelHttpUri (Exchange.HTTP_URI) - simply by supplying them as message user-headers. In a route where the Iggy consumer feeds a downstream HTTP producer, the injected CamelHttpUri redirects the server-side HTTP request to an attacker-chosen destination (server-side request forgery - for example to an internal service or a cloud metadata endpoint). In addition, the HTTP producer resolves Camel property placeholders on the resulting (attacker-controlled) URI, so placeholders embedded in the injected value - such as an environment-variable reference, an application property, or a vault reference - are resolved to their real values and sent to the attacker, disclosing environment variables, application properties and vault secrets. This issue affects Apache Camel: from 4.17.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix adds a dedicated IggyHeaderFilterStrategy (and a headerFilterStrategy endpoint option) that filters the Camel header namespace case-insensitively on inbound mapping, so externally-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from the inbound message before they reach any downstream producer (for example removeHeaders('Camel*') and removeHeaders('camel*') at the start of the route), restrict who can publish to the consumed Iggy stream/topic, and avoid bridging an untrusted consumer directly into an HTTP producer whose target URI can be driven from message headers.

vLLM is a library for LLM inference and serving. From 0.12.0 to before 0.24.0, sending a pure prompt embeds payload in a /v1/completions request with a model using M-RoPE causes EngineCore to fail an assertion and fatally crash, shutting down the entire server application. Any remote user who is authorized to make a /v1/completions request can make such a request and induce a crash. This issue is fixed in version 0.24.0.

FOSSBilling is a free, open-source billing and client management system. In versions 0.5.6 through 0.7.2, when a `ClientPasswordReset` record already exists for a client (from a previous unexpired reset request), subsequent calls to the `reset_password` guest API endpoint reuse the existing token instead of generating a new one. The 15-minute validity window is anchored to the first request's `created_at` timestamp, not the time of the most recent email. An attacker who obtained the original reset link remains able to use it even after the victim requests a new reset, because the original token is never invalidated or rotated. Version 0.8.0 patches the issue. Some workarounds are available. Configure a reverse proxy (e.g., Nginx, Apache, Cloudflare) to apply per-IP rate limiting to the `/client/reset-password` endpoint to minimize the window of opportunity, and/or manually clear expired `client_password_reset` records from the database after a client reports a suspected compromise.

Prog Management System developed by PROG MIS has a Exposure of Sensitive Information vulnerability, allowing unauthenticated remote attackers to view a specific page and obtain the database account and password.

Insufficient Session Expiration vulnerability in Apache Camel Keycloak Component. The camel-keycloak security helper KeycloakSecurityHelper.parseAndVerifyAccessToken builds a Keycloak TokenVerifier using withChecks(...) with only the subject-exists check and the realm-URL (issuer) check. Keycloak's TokenVerifier.withChecks(...) appends to an initially empty check list - the upstream default checks are installed only when withDefaultChecks() is called - so the built-in IS_ACTIVE predicate, which validates the token's exp (expiration) and nbf (not-before) claims, is never applied. As a result the helper verifies the token signature, subject and issuer but does not enforce the token's validity window: an access token that is expired, or not yet valid, is accepted as valid. Routes that rely on this helper to authenticate inbound requests therefore accept access tokens that are outside their intended lifetime. This issue affects Apache Camel: from 4.18.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix makes KeycloakSecurityHelper.parseAndVerifyAccessToken include the TokenVerifier.IS_ACTIVE check so that expired or not-yet-valid access tokens are rejected, aligning the helper with Keycloak's default check set. For deployments that cannot upgrade immediately, enforce token expiration outside the helper - for example validate the access token's exp/nbf claims in the route before trusting it, keep Keycloak access-token lifetimes short, and ensure any upstream gateway or resource server also validates the token validity window.

Improper Input Validation vulnerability in Apache Camel NATS component. The camel-nats component maps inbound NATS message headers into the Camel Exchange but defaulted its headerFilterStrategy to a bare new DefaultHeaderFilterStrategy() with no inbound rules configured (NatsConfiguration). With no inFilter, inFilterPattern or inFilterStartsWith set, DefaultHeaderFilterStrategy.applyFilterToExternalHeaders returns not filtered for every header name, so NatsConsumer copies every NATS message header - including Camel-internal control headers such as CamelHttpUri, CamelFileName or CamelSqlQuery - unmodified onto the Camel message. A client able to publish to the consumed NATS subject can therefore inject arbitrary Camel control headers that influence the behaviour of downstream producers in the route (for example redirecting an HTTP producer, changing a file name, or overriding a query); the injected headers also persist across internal direct, seda and vm hops. The concrete downstream impact depends on which producers the route uses. NATS message headers require NATS 2.2 or later, and the issue is reachable without credentials when the NATS server is configured without authentication (the NATS server default). This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix makes camel-nats default to a dedicated NatsHeaderFilterStrategy that filters the Camel header namespace case-insensitively on inbound mapping, so client-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from inbound NATS messages before they reach any downstream producer (for example removeHeaders('Camel*') and removeHeaders('camel*') at the start of the route), and enable authentication on the NATS server so that only trusted clients can publish to the consumed subject.

Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection'), Improper Input Validation, Server-Side Request Forgery (SSRF) vulnerability in Apache Camel Solr component. The camel-solr producer copies Exchange message headers whose names begin with the SolrParam. prefix into the parameters of the Solr request, and headers whose names begin with the SolrField. prefix into the fields of the indexed Solr document. The prefix constants (SolrConstants.HEADER_PARAM_PREFIX / HEADER_FIELD_PREFIX) were the plain strings SolrParam. / SolrField.. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a solr: producer, any HTTP client could therefore set SolrParam.* headers to inject arbitrary Solr request parameters - including shards or stream.url, which cause the Solr server to issue server-side requests to an attacker-chosen URL (server-side request forgery, for example to an internal service or a cloud metadata endpoint), or qt to reach administrative request handlers - and set SolrField.* headers to inject arbitrary fields into indexed documents. No credentials are required when the bridging consumer is unauthenticated. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set Solr parameters or fields via the raw header prefixes must use CamelSolrParam. / CamelSolrField. instead of SolrParam. / SolrField.. For deployments that cannot upgrade immediately, strip the SolrParam.* and SolrField.* headers from any untrusted ingress before the solr: producer, and set the required Solr parameters and fields from a trusted source in the route.