The FluentBoards WordPress plugin before 2.0.15 does not properly verify that a user holds board-manager privileges before performing several board-management operations, checking only board membership. This allows any member of a board to carry out manager-only actions on it, including adding or removing members and enabling public access to a private board.

n Concrete CMS 9.2.0 through 9.5.3, the REST API user creation endpoint (POST /ccm/api/1.0/users, the add() method of concrete/src/Api/Controller/Users.php) did not perform a permission check before creating an account. As a result, any valid OAuth token carrying the users:add scope, including a client_credentials token with no associated user context, could create active, validated user accounts, bypassing email verification and administrator approval. Under default registration settings the created accounts could then edit page content, providing a path to stored cross-site scripting and further compromise. The Concrete CMS security team gave this vulnerability a CVSS v4.0 score of 2.1 with vector CVSS:4.0/AV:N/AC:L/AT:P/PR:H/UI:N/VC:N/VI:L/VA:N/SC:N/SI:N/SA:N. Thanks Winston Crooker for reporting.

A vulnerability in the REST API of Cisco ISE could allow an authenticated, remote attacker to upload or copy arbitrary files on an affected device. This vulnerability is due to insufficient validation in file operations. An attacker could exploit this vulnerability by uploading a file with a crafted path. A successful exploit could allow the attacker to upload files to arbitrary locations and execute arbitrary commands as root on the affected device. To exploit this vulnerability, the attacker must have valid administrative credentials.

In the Linux kernel, the following vulnerability has been resolved: LoongArch: KVM: Validate MSI data before routing it to EIOINTC pch_msi_set_irq() passes e->msi.data straight into eiointc_set_irq() as the irq number. The MSI data comes from userspace, that either via a KVM_IRQ_ROUTING_MSI entry set with KVM_SET_GSI_ROUTING (used by irqfd and KVM_IRQ_LINE) or directly via KVM_SIGNAL_MSI, and is never checked against EIOINTC_IRQS. eiointc_set_irq() uses the value with __set_bit()/__clear_bit() on the 256-bit isr bitmap, eiointc_update_irq() then indexes sw_coremap[] and the per-cpu coreisr/sw_coreisr bitmaps with it. Therefore a data value >= 256 reads and writes memory past the end of those arrays, i.e. any process holding a VM fd can corrupt kernel memory beyond the allocation of loongarch_eiointc. Reject MSI data that doesn't fit in the EIOINTC irq space. The DMSINTC path is unaffected as it decodes the vector from the address and masks it.

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Zero-init bsg stack buffers to avoid info leak Several bsg handlers stage their request/reply in an uninitialized 256-byte on-stack buffer (uint8_t bsg[DMA_POOL_SIZE]) and fill it via sg_copy_to_buffer(), which only copies as many bytes as the user-supplied request payload. When the request is shorter than the structure, the remainder of the buffer is left holding stale stack data. qla2x00_read_fru_status() and qla2x00_read_i2c() then copy the full structure back to the reply payload with sg_copy_from_buffer(), leaking the uninitialized stack bytes to user space. The write/update paths do not copy the buffer back, but can feed uninitialized fields to the device. Zero the stack buffer at declaration in all five handlers, mirroring the heap kzalloc() approach, so short requests can no longer expose stale memory.

PatrowlManager through 1.8.4 contains an improper access control vulnerability in the user listing API endpoint where the authorization decorator is commented out. Authenticated attackers with low-privilege accounts can enumerate all users and their privilege flags including superuser and staff status by accessing the endpoint.

RabbitMQ amqp091-go is a Go AMQP 0.9.1 client. Prior to 1.13.0, PlainAuth values defined in auth.go retain passwords as exported plaintext fields in Connection.Config.SASL after a successful PLAIN authentication handshake. The Connection.openComplete method in connection.go does not clear those values. Code with access to the Connection object, including reflective loggers, application performance monitoring agents, debugging utilities, and panic handlers, can traverse the configuration and expose the credentials to logs or state captures. The credential remains available for the lifetime of the connection instead of being cleared after authentication. This issue is fixed in version 1.13.0.

The LearnPress WordPress plugin before 4.4.7 does not check the user's capabilities in one of its administrative course tools, allowing unauthenticated attackers to list every enrolled student's display name and user identifier against the course they are enrolled on, and to recover their email addresses through the same handler's search filter.

In the Linux kernel, the following vulnerability has been resolved: vfio/pci: clear vdev->msi_perm after freeing it on init failure vfio_msi_cap_len() lazily allocates the per-device MSI permission table: vdev->msi_perm = kmalloc_obj(struct perm_bits, GFP_KERNEL_ACCOUNT); if (!vdev->msi_perm) return -ENOMEM; ret = init_pci_cap_msi_perm(vdev->msi_perm, len, flags); if (ret) { kfree(vdev->msi_perm); return ret; /* vdev->msi_perm left dangling */ } When init_pci_cap_msi_perm() -> alloc_perm_bits() fails with -ENOMEM, the error path frees vdev->msi_perm but leaves the freed pointer stored in it. vdev->msi_perm is not re-zeroed later because struct vfio_pci_core_device is per-device and persists across open/close cycles, and the vfio_config_init() error path returns without calling vfio_config_free(). So the dangling pointer outlives the failed open. That leads to two use-after-frees on the same device: 1. Reuse. The next vfio_config_init() sees the stale pointer at "if (vdev->msi_perm) return len;" and reuses the freed object. MSI config accesses in vfio_pci_config_rw_single() then dereference and call the freed perm->readfn / perm->writefn function pointers. 2. Double free. A later vfio_config_free() runs free_perm_bits() and kfree() on the already-freed object. Fix it by NULLing vdev->msi_perm after the kfree(), matching the NULL-after-free discipline already used in free_perm_bits() and vfio_config_free(). BUG: KASAN: slab-use-after-free in vfio_pci_config_rw_single (drivers/vfio/pci/vfio_pci_config.c:1961) Read of size 8 at addr ffff88800fcc88d0 by task exploit/143 Call Trace: ... kasan_report (mm/kasan/report.c:595) vfio_pci_config_rw_single (drivers/vfio/pci/vfio_pci_config.c:1961) vfio_pci_config_rw (drivers/vfio/pci/vfio_pci_config.c:1986) vfio_pci_rw (drivers/vfio/pci/vfio_pci_core.c:1599) vfs_read (fs/read_write.c:572) __x64_sys_pread64 (fs/read_write.c:764) do_syscall_64 (arch/x86/entry/syscall_64.c:94) ... Followed on device close by a double free of the same object: Oops: general protection fault, probably for non-canonical address 0x1f63e0e8000008: 0000 [#1] SMP KASAN NOPTI RIP: 0010:kfree (mm/slub.c:6711) Call Trace: vfio_config_free (drivers/vfio/pci/vfio_pci_config.c:1861) vfio_pci_core_disable (drivers/vfio/pci/vfio_pci_core.c:685) vfio_pci_core_close_device (drivers/vfio/pci/vfio_pci_core.c:777) vfio_df_close (drivers/vfio/vfio_main.c:602) vfio_device_fops_release (drivers/vfio/vfio_main.c:648) __fput (fs/file_table.c:512) __x64_sys_close (fs/open.c:1496) do_syscall_64 (arch/x86/entry/syscall_64.c:94) ... Kernel panic - not syncing: Fatal exception

In the Linux kernel, the following vulnerability has been resolved: media: qcom: iris: use disable_irq() during power-off The IRQ is registered as a threaded IRQ. Using disable_irq_nosync() in iris_vpu_power_off() does not wait for an already queued threaded IRQ handler to complete before returning. As a result, a threaded IRQ handler may still run after the VPU has been powered down and access hardware registers after power-off. Replace disable_irq_nosync() with disable_irq() so the power-off path waits for any in-flight threaded IRQ handler to complete before returning.