In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: validate advertising TLV before type checks tlv_data_is_valid() reads each advertising data field length from data[i], then inspects data[i + 1] for managed EIR types before checking that the current field still fits inside the supplied buffer. A malformed field whose length byte is the last byte of the buffer can therefore make the parser read one byte past the advertising data. KASAN reported the following when a malformed MGMT_OP_ADD_ADVERTISING request reached that path: BUG: KASAN: vmalloc-out-of-bounds in tlv_data_is_valid() Read of size 1 Call trace: tlv_data_is_valid() add_advertising() hci_mgmt_cmd() hci_sock_sendmsg() Move the existing element-length check before any type-octet inspection so each non-empty element is proven to contain its type byte before the parser looks at data[i + 1].

GitLab has remediated an issue in GitLab EE affecting all versions from 17.9 before 18.11.6, 19.0 before 19.0.3, and 19.1 before 19.1.1 that under certain conditions could have allowed an authenticated user with custom role permissions to view, create, or delete protected environment configurations despite CI/CD visibility being disabled for the project.

In the Linux kernel, the following vulnerability has been resolved: drm/gem: Try to fix change_handle ioctl, attempt 4 [airlied: just added some comments on how to reenable] On-list because the cat is out of the bag and we're clearly not good enough to figure this out in private. The story thus far: 5e28b7b94408 ("drm: Set old handle to NULL before prime swap in change_handle") tried to fix a race condition between the gem_close and gem_change_handle ioctls, but got a few things wrong: - There's a confusion with the local variable handle, which is actually the new handle, and so the two-stage trick was actually applied to the wrong idr slot. 7164d78559b0 ("drm/gem: fix race between change_handle and handle_delete") tried to fix that by adding yet another code block, but forgot to add the error handling. Which meant we now have two paths, both kinda wrong. - dc366607c41c ("drm: Replace old pointer to new idr") tried to apply another fix, but inconsistently, again because of the handle confusion - this would be the right fix (kinda, somewhat, it's a mess) if we'd do the two-stage approach for the new handle. Except that wasn't the intent of the original fix. We also didn't have an igt merged for the original ioctl, which is a big no-go. This was attempted to address off-list in the original bugfix, and amd QA people claimed the bug was fixed now. Very clearly that's not the case. Here's my attempt to sort this out: - Rename the local variable to new_handle, the old aliasing with args->handle is just too dangerously confusing. - Merge the gem obj lookup with the two-stage idr_replace so that we avoid getting ourselves confused there. - This means we don't have a surplus temporary reference anymore, only an inherited from the idr. A concurrent gem_close on the new_handle could steal that. Fix that with the same two-stage approach create_tail uses. This is a bit overkill as documented in the comment, but I also don't trust my ability to understand this all correctly, so go with the established pattern we have from other ioctls instead for maximum paranoia. - Adjust error paths. I've tried to make the error and success paths common, because they are identical except for which handle is removed and on which we call idr_replace to (re)install the object again. But that made things messier to read, so I've left it at the more verbose version, which unfortunately hides the symmetry in the entire code flow a bit. - While at it, also replace the 7 space indent with 1 tab. And finally, because I flat out don't trust my abilities here at all anymore: - Disable the ioctl until we have the igt situation and everything else sorted out on-list and with full consensus. v2: Sashiko noticed that I didn't handle the error path for idr_replace correctly, it must be checked with IS_ERR_OR_NULL like in gem_handle_delete. So yeah, definitely should just the existing paths 1:1 because this is endless amounts of tricky. Also add the Fixes: line for the original ioctl, I forgot that too.

In the Linux kernel, the following vulnerability has been resolved: mmc: dw_mmc-rockchip: Add missing private data for very old controllers The really old controllers (rk2928, rk3066, rk3188) do not support UHS speeds at all, and thus never handled phase data. For that reason it never had a parse_dt callback and no driver private data at all. Commit ff6f0286c896 ("mmc: dw_mmc-rockchip: Add memory clock auto-gating support") makes the private data sort of mandatory, because the init function checks whether phases are configured internally or through the clock controller. This results in the old SoCs then experiencing NULL-pointer dereferences when they try to access that private-data struct. While we could have if (priv) conditionals in all places, it's way less cluttery to just give the old types their private-data struct.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Bound VBIOS record-chain walk loops [Why & How] All record-chain walk loops in bios_parser.c and bios_parser2.c use for(;;) and only terminate on a 0xFF record_type sentinel or zero record_size. A malformed VBIOS image missing the terminator record causes unbounded iteration at probe time, potentially hundreds of thousands of iterations with record_size=1. In the final iterations near the BIOS image boundary, struct casts beyond the 2-byte header validated by GET_IMAGE can also read out of bounds. Cap all 14 record-chain walk loops to BIOS_MAX_NUM_RECORD (256) iterations. The atombios.h defines up to 22 distinct record types and atomfirmware.h has 13. Assuming an average of less than 10 records per type (which is reasonable since most are connector- based) 256 is a generous upper bound. (cherry picked from commit 95700a3d660287ed657d6892f7be9ffc0e294a93)

In the Linux kernel, the following vulnerability has been resolved: ipv6: Fix a potential NPD in cleanup_prefix_route() addrconf_get_prefix_route() can return the fib6_null_entry sentinel entry which has a NULL fib6_table pointer. Therefore, before setting the route's expiration time, check that we are not working with this entry, as otherwise a NPD will be triggered [1]. Note that the other callers of addrconf_get_prefix_route() are not susceptible to this bug: 1. addrconf_prefix_rcv(): Requests a route with the 'RTF_ADDRCONF | RTF_PREFIX_RT' flags which are not set on fib6_null_entry. 2. modify_prefix_route(): Fixed by commit a747e02430df ("ipv6: avoid possible NULL deref in modify_prefix_route()"). 3. __ipv6_ifa_notify(): Calls ip6_del_rt() which specifically checks for fib6_null_entry and returns an error. [1] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037] [...] Call Trace: <TASK> __kasan_check_byte (mm/kasan/common.c:573) lock_acquire.part.0 (kernel/locking/lockdep.c:5842 (discriminator 1)) _raw_spin_lock_bh (kernel/locking/spinlock.c:182 (discriminator 1)) cleanup_prefix_route (net/ipv6/addrconf.c:1280) ipv6_del_addr (net/ipv6/addrconf.c:1342) inet6_addr_del.isra.0 (net/ipv6/addrconf.c:3119) inet6_rtm_deladdr (net/ipv6/addrconf.c:4812) rtnetlink_rcv_msg (net/core/rtnetlink.c:6997) netlink_rcv_skb (net/netlink/af_netlink.c:2555) netlink_unicast (net/netlink/af_netlink.c:1344) netlink_sendmsg (net/netlink/af_netlink.c:1899) __sock_sendmsg (net/socket.c:802 (discriminator 4)) ____sys_sendmsg (net/socket.c:2698) ___sys_sendmsg (net/socket.c:2752) __sys_sendmsg (net/socket.c:2784) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Clamp HDMI HDCP2 rx_id_list read to buffer size [Why & How] During HDCP 2.x repeater authentication over HDMI, the driver reads the sink's RxStatus register and extracts a 10-bit message size field (max value 1023). This value is used as the read length for the ReceiverID list without being clamped to the size of the destination buffer rx_id_list[177]. A malicious HDMI repeater could advertise a message size larger than the buffer, causing an out-of-bounds write during the I2C read. Clamp the read length in mod_hdcp_read_rx_id_list() to the size of the rx_id_list buffer, matching the approach already used in the DP branch. (cherry picked from commit 229212219e4247d9486f8ba41ef087358490be09)

In the Linux kernel, the following vulnerability has been resolved: wifi: nl80211: reject oversized EMA RNR lists nl80211_parse_rnr_elems() stores the parsed element count in a u8-backed cfg80211_rnr_elems::cnt field and uses that count to size the flexible array allocation. Reject nested NL80211_ATTR_EMA_RNR_ELEMS input once the count reaches 255, before incrementing it again. This keeps the parser aligned with the data structure it fills and matches the existing bound check used by nl80211_parse_mbssid_elems().

In the Linux kernel, the following vulnerability has been resolved: tcp: Add preempt_{disable,enable}_nested() in reqsk_queue_hash_req(). syzbot reported a weird reqsk->rsk_refcnt underflow in __inet_csk_reqsk_queue_drop(). The captured reqsk_put() in __inet_csk_reqsk_queue_drop() is called only when it successfully removes reqsk from ehash. Moreover, reqsk_timer_handler() calls another reqsk_put() after that. This indicates that the reqsk was missing both refcnts for ehash and the timer itself. Since all the syzbot reports had PREEMPT_RT enabled, the only possible scenario is that reqsk_queue_hash_req() is preempted after mod_timer() and before refcount_set(), and then the timer triggered after 1s aborts the reqsk due to its listener's close(). Let's wrap mod_timer() and refcount_set() with preempt_disable_nested() and preempt_enable_nested(). Note that inet_ehash_insert() holds the normal spin_lock() (mutex in PREEMPT_RT), so it must be called outside of preempt_disable_nested(), but this is fine. The lookup path just ignores 0 sk_refcnt entries in ehash and tries to create another reqsk, but this will fail at inet_ehash_insert(). [0]: refcount_t: underflow; use-after-free. WARNING: lib/refcount.c:28 at refcount_warn_saturate+0xb2/0x110 lib/refcount.c:28, CPU#0: ktimers/0/16 Modules linked in: CPU: 0 UID: 0 PID: 16 Comm: ktimers/0 Tainted: G L syzkaller #0 PREEMPT_{RT,(full)} Tainted: [L]=SOFTLOCKUP Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/18/2026 RIP: 0010:refcount_warn_saturate+0xb2/0x110 lib/refcount.c:28 Code: e4 7d d1 0a 67 48 0f b9 3a eb 4a e8 38 3d 23 fd 48 8d 3d e1 7d d1 0a 67 48 0f b9 3a eb 37 e8 25 3d 23 fd 48 8d 3d de 7d d1 0a <67> 48 0f b9 3a eb 24 e8 12 3d 23 fd 48 8d 3d db 7d d1 0a 67 48 0f RSP: 0000:ffffc90000157948 EFLAGS: 00010246 RAX: ffffffff84a1301b RBX: 0000000000000003 RCX: ffff88801ca98000 RDX: 0000000000000100 RSI: 0000000000000000 RDI: ffffffff8f72ae00 RBP: ffffffff99ae3b01 R08: ffff88801ca98000 R09: 0000000000000005 R10: 0000000000000100 R11: 0000000000000004 R12: ffff8880425ef568 R13: ffff8880425ef4f8 R14: ffff8880425ef578 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff888126386000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7b46710e9c CR3: 000000000dbb6000 CR4: 00000000003526f0 Call Trace: <TASK> __refcount_sub_and_test include/linux/refcount.h:400 [inline] __refcount_dec_and_test include/linux/refcount.h:432 [inline] refcount_dec_and_test include/linux/refcount.h:450 [inline] reqsk_put include/net/request_sock.h:136 [inline] __inet_csk_reqsk_queue_drop+0x3ce/0x440 net/ipv4/inet_connection_sock.c:1007 reqsk_timer_handler+0x651/0xdf0 net/ipv4/inet_connection_sock.c:1137 call_timer_fn+0x192/0x5e0 kernel/time/timer.c:1748 expire_timers kernel/time/timer.c:1799 [inline] __run_timers kernel/time/timer.c:2374 [inline] __run_timer_base+0x6a3/0x9f0 kernel/time/timer.c:2386 run_timer_base kernel/time/timer.c:2395 [inline] run_timer_softirq+0x67/0x170 kernel/time/timer.c:2403 handle_softirqs+0x1de/0x6d0 kernel/softirq.c:622 __do_softirq kernel/softirq.c:656 [inline] run_ktimerd+0x69/0x100 kernel/softirq.c:1151 smpboot_thread_fn+0x541/0xa50 kernel/smpboot.c:160 kthread+0x388/0x470 kernel/kthread.c:436 ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK>

GitLab has remediated an issue in GitLab CE/EE affecting all versions from 17.5 before 18.11.6, 19.0 before 19.0.3, and 19.1 before 19.1.1 that under certain conditions could have allowed an unauthenticated user to view confidential issue references on public projects due to improper authorization checks.