AVideo through commit 9c39d8c8 contains an authentication bypass vulnerability where deduplicateByEncoderQueueId() returns video_id_hash credentials for any video by encoder_queue_id without ownership verification, and useVideoHashOrLogin() converts this hash into passwordless login as the video owner. Attackers with upload permission can retrieve an administrator's video_id_hash by omitting the videos_id parameter, then use that hash in an unauthenticated request to gain administrative session access and modify system configuration.

In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Initialise reader page order in rb_allocate_cpu_buffer() In rb_allocate_cpu_buffer(), bpage->order was omitted, leaving it as 0. This is an issue for a ring-buffer with subbufs bigger than PAGE_SIZE if when freed: free_buffer_page() relies on this value. Align the value with the actual allocation size (buffer::subbuf_order).

In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_api: Always acquire rtnl_lock when destroying locked classifiers Another challenge with unlocked filters. There is a short window in tc_new_tfilter where a tcf_proto can be found and briefly referenced by a totally unrelated, unlocked classifier's request and cause a race. Feng created a poc which created this race with two threads, one creating a u32 filter and other a flower filter in the same chain/prio: 1. Both threads enter tc_new_tfilter, both find the chain empty, both drop filter_chain_lock 2. u32 finishes tcf_proto_create("u32") first, calls tcf_chain_tp_insert_unique() -> inserts u32_tp into the chain 3. flower finishes tcf_proto_create("flower") later, calls tcf_chain_tp_insert_unique() -> tcf_chain_tp_find() now sees u32_tp already there, takes a reference on it, destroys flower's own tp_new and returns u32_tp to the caller. Flower then hits the kind mismatch check (because it requested for kind "flower" but tp->ops->kind is "u32") and goes through the errout path which calls tcf_proto_put() on u32_tp. If the u32 thread has already gone through its own errout (its change() call failed on the PoC's empty options) and dropped its create and insert refs, flower's put is the last one and drops u32_tp's refcnt to zero. At this point tp->ops->destroy() runs in a context that never took rtnl_lock. When that happens, it might cause a UAF like the following (illustrated by the PoC): [ +0.000710] BUG: KASAN: slab-use-after-free in u32_init (net/sched/cls_u32.c:393) [ +0.000281] Read of size 8 at addr ffff888120022f00 by task poc_feng_xue/524 Call Trace: u32_init (net/sched/cls_u32.c:393) tc_new_tfilter (net/sched/cls_api.c:2378) Allocated by task 526: u32_init (net/sched/cls_u32.c:378) tc_new_tfilter (net/sched/cls_api.c:2378) Freed by task 522: kfree u32_destroy (net/sched/cls_u32.c:662) tcf_proto_destroy (net/sched/cls_api.c:446) tcf_proto_put (net/sched/cls_api.c:459) tc_new_tfilter (net/sched/cls_api.c:2459) Fix this by having tcf_proto_destroy() take rtnl_lock around tp->ops->destroy() for locked classifiers whenever rtnl is not held. To explain why I used a temp variable "not_lockless" I'd like to point to a semi-related note on rtnl_held vs TCF_PROTO_OPS_DOIT_UNLOCKED (adding here for future cleanup if deemed necessary): The rtnl_held parameter and the TCF_PROTO_OPS_DOIT_UNLOCKED flag are redundant sources of truth for whether rtnl_lock is held. Among the nine classifier destroy(..rtnl_held..) callbacks, only flower consults the rtnl_held parameter which it propagates to tc_setup_cb_destroy() and tc_setup_cb_call(). The other eight (u32, flow, bpf, cgroup, route, basic, fw, mall) ignore it entirely;-> those that call tc_setup_cb_destroy() (u32, bpf, mall) hardcode true always instead of forwarding the parameter. A future cleanup should remove the rtnl_held parameter from the destroy callback signature entirely and have callers rely solely on their knowledge whether they are running in an unlocked context.

In the Linux kernel, the following vulnerability has been resolved: sctp: clear control chunk transport if it is being removed sctp_make_heartbeat_ack() caches the destination transport in chunk->transport without taking a reference. When src_out_of_asoc_ok is enabled, the HEARTBEAT ACK may remain queued on control_chunk_list instead of being transmitted immediately. If the peer transport is removed while the chunk is still queued, sctp_assoc_rm_peer() drops the transport and schedules it for RCU freeing, but only clears cached transport pointers in out_chunk_list. The queued control chunk therefore retains a dangling transport pointer. Once an ASCONF_ACK clears the suppression and the queued control chunk is transmitted, SCTP dereferences the stale transport pointer, leading to a use-after-free. Fix this by also clearing chunk->transport for queued control chunks in control_chunk_list when removing the transport.

In the Linux kernel, the following vulnerability has been resolved: fsverity: Fix bpf_get_fsverity_digest() dynptr assumptions The BPF verifier and the dynptr abstraction ensure that the memory space referenced by a dynptr remains valid. They do not, however, provide any guarantee that the contents of the memory are stable. kfuncs are expected to remain memory-safe even if concurrent modifications occur. bpf_get_fsverity_digest() didn't follow that: it could crash if arg->digest_size was concurrently modified. Fix that by using the known-good value hash_alg->digest_size instead. Also widen 'dynptr_sz' and 'out_digest_sz' to u64 to match the return type of __bpf_dynptr_size(). It doesn't appear that it can actually be more than INT_MAX currently (since __bpf_dynptr_data_rw() excludes file-based pointers), but the correct type might as well be used.

In the Linux kernel, the following vulnerability has been resolved: mm: fix incorrect flush address in direct page table reclaim When zap_pte_range reclaims a page table, it does: pte_free_tlb(tlb, pmd_pgtable(pmdval), addr); and this is unconditionally wrong: if this code executes, addr *always* points one past the end of the range covered by the table. The addr parameter is used to flush the TLB (really the paging-structure-cache) to drop references to the to-be-freed table, and any architecture that cares about the parameter will flush the wrong address. (But they'll still free the correct page). I think it's worth contemplating why the kernel works at all. If we hit the offending line of code, we will first clear the PMD entry (line 1954, zap_empty_pte_table), then we will issue pending flushes if force_flush is set (tlb_flush_mmu_tlbonly(tlb)), then we will skip the retry on line 1979 (phew!), and then we will do the offending pte_free_tlb call. *Or* we will clear the PMD entry immediately before pte_free_tlb (line 1983, zap_pte_table_if_empty). If we have any pending flushes (i.e. we actually zapped any last-level entries) at the time we clear the PMD entry, then the flush really ought to flush all references to the table (Linus certainly seems to think it will on all architectures [0]). The condition under which we have no accumulated flushes at the time of the clear is very complex (the whole zap_pte_range function has absurdly complex control flow). If we do hit the bad case, then we will end up clearing the PMD entry after the last time the range is flushed, and any CPU is free to cache a reference to the (empty) page table. If this happens due to an ordinary read or write, it would segfault, so it would be rare. But the cache could be speculatively filled as well. Then we'll flush the wrong address and then free and possibly reuse the table. On x86, even flushing the wrong address works on non-KPTI Intel systems because INVLPG flushes *all* paging-structure-caches, not just the ones for the target address. But INVPCID does not, and flush_tlb_one_user will use INVPCID if it's available. And then we're toast. AMD systems are more susceptible: we set the EFER.TCE bit, which makes even INVLPG only flush the target address. I think this might fix an issue in ripgrep reported here: https://github.com/BurntSushi/ripgrep/issues/3494 [0] https://lore.kernel.org/all/CA+55aFzBggoXtNXQeng5d_mRoDnaMBE5Y+URs+PHR67nUpMtaw@mail.gmail.com/T/#u

The WS Form LITE – Drag & Drop Contact Form Builder plugin for WordPress is vulnerable to PHP Object Injection in all versions up to, and including, 1.10.80 via deserialization of untrusted input from form submission meta values. This makes it possible for unauthenticated attackers to inject a PHP Object. No known POP chain is present in the vulnerable software, which means this vulnerability has no impact unless another plugin or theme containing a POP chain is installed on the site. If a POP chain is present via an additional plugin or theme installed on the target system, it may allow the attacker to perform actions like delete arbitrary files, retrieve sensitive data, or execute code depending on the POP chain present.

The ManageWP Worker WordPress plugin before 4.9.37 does not bind the account being logged in to the signature which authorises the login, nor prevent an already used login link from being replayed, allowing attackers who obtain such a link to gain a session as any user on the site, including an administrator.

The Security Hardener plugin for WordPress is vulnerable to Missing Authorization in all versions up to, and including, 2.4.4. The vulnerability exists because the plugin's user-enumeration protection, which is enabled by default, hooks the rest_endpoints filter via secure_user_endpoints() and overwrites every registered handler's permission_callback on both the /wp/v2/users and /wp/v2/users/(?P<id>[\d]+) routes — including POST, PUT, PATCH, and DELETE handlers — with a bare closure that returns only is_user_logged_in(), completely stripping WordPress Core's original capability checks such as create_users, promote_user, edit_users, and delete_users that WP_REST_Users_Controller normally enforces. This makes it possible for authenticated attackers with Subscriber-level access and above to create new Administrator accounts by sending POST request to /wp/v2/users with administrator role, or to reset an existing Administrator's password by issuing a PUT/POST request to /wp/v2/users/<id>. Because the block_user_enum option defaults to enabled, no special plugin configuration is required — the overwrite is active on every request as soon as the plugin is installed.

The Slider Hero with Video Background, Animation WordPress plugin before 9.1.3 does not have authorisation and nonce checks on two of its request handlers, and does not escape a stored setting before outputting it, allowing unauthenticated users to store malicious JavaScript which will be executed in the context of an administrator viewing the Slider Hero with Video Background, Animation WordPress plugin before 9.1.3's admin area, as well as any visitor of a page embedding a slider.