A flaw was found in the Data Science Pipelines Operator (DSPO). The operator's ClusterRole, which defines its permissions, includes extensive privileges beyond what is necessary for its operation. These excessive permissions, such as the ability to execute commands within pods and manage cluster-wide roles, could be exploited. If the DSPO pod were compromised, an attacker could leverage these privileges to gain full administrative control over the entire Kubernetes cluster.

None

In the Linux kernel, the following vulnerability has been resolved: dpaa2-switch: put MAC endpoint device on disconnect fsl_mc_get_endpoint() returns the MAC endpoint device with a reference taken through device_find_child(). The switch port connect path stores that device in mac->mc_dev and keeps it for the lifetime of the connected MAC object. However, the disconnect path only closes the MAC and frees the dpaa2_mac object. It does not drop the endpoint device reference stored in mac->mc_dev, so every successful connect leaks that device reference when the MAC is later disconnected. Drop the endpoint device reference before freeing the dpaa2_mac object.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Use sender devcom for MPV master-up After PCIe DPC recovery, mlx5 reloads the affected functions and replays multiport affiliation events. In the reported failure, the first relevant device error was: pcieport 0000:10:01.1: DPC: containment event pcieport 0000:10:01.1: PCIe Bus Error: severity=Uncorrected (Fatal) pcieport 0000:10:01.1: [ 5] SDES (First) mlx5 recovered the PCI functions and resumed 0000:11:00.1. During that resume, RDMA multiport binding replayed MLX5_DRIVER_EVENT_AFFILIATION_DONE and mlx5e sent MPV_DEVCOM_MASTER_UP. The host then panicked with: BUG: kernel NULL pointer dereference, address: 0000000000000010 RIP: mlx5_devcom_comp_set_ready+0x5/0x40 [mlx5_core] RDI: 0000000000000000 Call trace included: mlx5_devcom_comp_set_ready mlx5e_devcom_event_mpv mlx5_devcom_send_event mlx5_ib_bind_slave_port mlx5r_mp_probe mlx5_pci_resume MPV devcom registration publishes mlx5e private data to the component peer list before mlx5e_devcom_init_mpv() stores the returned component device in priv->devcom. A concurrent master-up event can therefore reach a peer whose private data is visible but whose priv->devcom backpointer is still NULL. MPV_DEVCOM_MASTER_UP already carries the sender/master mlx5e private data as event_data. The ready bit is stored on the shared devcom component, not on an individual peer. Use the sender devcom when marking the MPV component ready. This preserves the readiness transition while avoiding a NULL dereference of the peer devcom pointer during affiliation replay after PCI error recovery.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix kernel panic during driver load failure Avoid kernel panic if MES init fails during driver load. The KIQ ring is falsely marked as ready as ASICs that use MES, KIQ is owned by MES. BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: 0010:gfx_v12_1_wait_reg_mem+0x5a/0x1f0 [amdgpu] Call Trace: gfx_v12_1_ring_emit_reg_write_reg_wait+0x1f/0x30 [amdgpu] amdgpu_gmc_fw_reg_write_reg_wait+0xb2/0x190 [amdgpu] amdgpu_gmc_flush_gpu_tlb+0x1cc/0x230 [amdgpu] amdgpu_gart_invalidate_tlb+0x81/0xa0 [amdgpu] amdgpu_gart_unbind+0x72/0x90 [amdgpu] amdgpu_ttm_backend_unbind+0xa4/0xb0 [amdgpu] amdgpu_ttm_tt_unpopulate+0x13/0xd0 [amdgpu] amdttm_tt_unpopulate+0x29/0x70 [amdttm] ttm_bo_put+0x1eb/0x360 [amdttm] amdgpu_bo_free_kernel+0xf9/0x1f0 [amdgpu] amdgpu_ih_ring_fini+0x5a/0x90 [amdgpu] amdgpu_irq_fini_hw+0x58/0x80 [amdgpu] amdgpu_device_fini_hw+0x4e0/0x5b0 [amdgpu] amdgpu_driver_load_kms+0x60/0xa0 [amdgpu] amdgpu_pci_probe+0x28e/0x6d0 [amdgpu] pci_device_probe+0x19f/0x220 really_probe+0x1ed/0x340 driver_probe_device+0x1e/0x80 __driver_attach+0xd3/0x1a0 bus_for_each_dev+0x68/0xa0 bus_add_driver+0x19f/0x270 driver_register+0x5d/0xf0 do_one_initcall+0xac/0x200 do_init_module+0x1ec/0x280 __se_sys_finit_module+0x2de/0x310 do_syscall_64+0x6a/0x250 entry_SYSCALL_64_after_hwframe+0x4b/0x53 (cherry picked from commit 4623b958dd6da0f4c3026afdf330626a09ecb0f0)

An unauthenticated SQL injection vulnerability exists in the web server of TBEA TLogger V2.1.0.0B0.0.0.0. Multiple HTTP endpoints incorporate attacker-controlled parameters directly into SQLite queries without sufficient validation or parameterization. A remote unauthenticated attacker can exploit these endpoints to read, modify, or delete data stored in the device's CCU.db database.

Metacat is data repository software that helps researchers preserve, share, and discover data. Versions 2.x through 2.19.1 and all 1.x versions contain an unauthenticated path traversal in the `archiveEntryName` parameter of the `action=read` endpoint that is part of the original 1.x Metacat API. `ArchiveHandler.readArchiveEntry()` concatenates the user-supplied parameter into a filesystem path without validation, and the surrounding `hasReadPermission()` check is commented out. An unauthenticated remote attacker can read any file accessible to the Tomcat process by sending a single GET request. Proof-of-concept exploits have been demonstrated and verified against this vulnerability, and it should be considered easily exploitable for any Metacat deployment < 3.0.0 by any user with access to the 1.x API. Through this vulnerability, production 2.x deployments are exposed to credential theft, client certificate and private key exfiltration enabling member node impersonation within the federation, embargoed research data disclosure, and broad system reconnaissance. Given Metacat's deployment footprint across the DataONE network of repositories and federally funded research programs, the population of exposed 2.x instances is non-trivial. The vulnerability was eliminated in Metacat version 3.0.0 and after by eliminating the entire Metacat 1.x API that exposed this vulnerability. The vulnerability was remediated in April 2024 with the release of Metacat 3.0.0, which removed the legacy Metacat API including ArchiveHandler.java. The commit message and issue reference architectural cleanup, not a security fix, and no advisory or CVE was issued. The 2.x branch was not and will not be backported, as is standard practice in Metacat, which only supports the most current release. 2.19.1 remains vulnerable with identical code and is beyond its supported lifetime. As a workaround, disable or restrict 1.x API servlets. Because the vulnerable 1.x API is no longer used or necessary in most Metacat deployments, restricting access to the old API endpoints can reduce or eliminate exposure for 2.19.x deployments. After removing those features, restart Tomcat or whichever software is hosting the servlets.

In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: validate ranges in damon_set_regions() DAMON core logic assumes zero length regions don't exist. However, a few DAMON API callers including DAMON_SYSFS, DAMON_RECLAIM and DAMON_LRU_SORT allow users to set empty monitoring target regions. This could result in WARN_ONCE() on CONFIG_DAMON_DEBUG_SANITY enabled kernel, and divide-by-zero from damon_merge_two_regions(). For example, the WANR_ONCE() can be triggered like below. # grep DAMON_DEBUG_SANITY /boot/config-$(uname -r) # CONFIG_DAMON_DEBUG_SANITY=y # damo start # cd /sys/kernel/mm/damon/admin/kdamonds/0 # echo 0 > contexts/0/targets/0/regions/0/start # echo 0 > contexts/0/targets/0/regions/0/end # echo commit > state # dmesg [....] [ 73.705780] ------------[ cut here ]------------ [ 73.707552] start 0 >= end 0 [ 73.708452] WARNING: mm/damon/core.c:359 at damon_new_region+0x6e/0x80, CPU#1: kdamond.0/758 [...] All DAMON API callers eventually use damon_set_regions() to setup the regions. Add the validation logic in the function.

In the Linux kernel, the following vulnerability has been resolved: media: pwc: Drain fill_buf on start_streaming() failure pwc_isoc_init() submits its isochronous URBs with usb_submit_urb(.., GFP_KERNEL) in a loop. After the first URB is submitted, its completion handler pwc_isoc_handler() can run on another CPU before the loop finishes: start_streaming() pwc_isoc_init() usb_submit_urb(urbs[0], GFP_KERNEL) pwc_isoc_handler(urbs[0]) pdev->fill_buf = pwc_get_next_fill_buf(pdev) usb_submit_urb(urbs[i>0], ..) -> fails pwc_isoc_cleanup(pdev) /* kills URBs */ return ret; pwc_cleanup_queued_bufs(pdev, VB2_BUF_STATE_QUEUED) pwc_get_next_fill_buf() detaches a buffer from pdev->queued_bufs and stores it in pdev->fill_buf. The error path in start_streaming() only drains pdev->queued_bufs, so the buffer parked in pdev->fill_buf is leaked. vb2_start_streaming() then triggers WARN_ON(owned_by_drv_count). stop_streaming() already handles this since commit 80b0963e1698 ("[media] pwc: fix WARN_ON"), which added the fill_buf drain in the teardown path but not in the start_streaming() error path. Mirror that handling on failure so start_streaming() returns with no buffer owned by the driver. Issue identified by automated review of the INV-003 series at https://sashiko.dev/

In the Linux kernel, the following vulnerability has been resolved: drm/i915/vrr: require valid min/max vfreq for VRR Ensure the EDID provided min/max vfreq are valid. Most scenarios are already covered (by coincidence) through the checks in intel_vrr_is_capable() and intel_vrr_is_in_range(), but be more explicit about it. At worst, a zero min_vfreq could lead to a division by zero in intel_vrr_compute_vmax(). Discovered using AI-assisted static analysis confirmed by Intel Product Security. (cherry picked from commit 1765cf59f517b02f3b0591fe5120930d08bddeb6)