Wasmtime is a runtime for WebAssembly. From 25.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime with its Winch (baseline) non-default compiler backend may allow properly constructed guest Wasm to access host memory outside of its linear-memory sandbox. This vulnerability requires use of the Winch compiler (-Ccompiler=winch). By default, Wasmtime uses its Cranelift backend, not Winch. With Winch, the same incorrect assumption is present in theory on both aarch64 and x86-64. The aarch64 case has an observed-working proof of concept, while the x86-64 case is theoretical and may not be reachable in practice. This Winch compiler bug can allow the Wasm guest to access memory before or after the linear-memory region, independently of whether pre- or post-guard regions are configured. The accessible range in the initial bug proof-of-concept is up to 32KiB before the start of memory, or ~4GiB after the start of memory, independently of the size of pre- or post-guard regions or the use of explicit or guard-region-based bounds checking. However, the underlying bug assumes a 32-bit memory offset stored in a 64-bit register has its upper bits cleared when it may not, and so closely related variants of the initial proof-of-concept may be able to access truly arbitrary memory in-process. This could result in a host process segmentation fault (DoS), an arbitrary data leak from the host process, or with a write, potentially an arbitrary RCE. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1.

Wasmtime is a runtime for WebAssembly. From 25.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime's Winch compiler backend contains a bug where translating the table.grow operator causes the result to be incorrectly typed. For 32-bit tables this means that the result of the operator, internally in Winch, is tagged as a 64-bit value instead of a 32-bit value. This invalid internal representation of Winch's compiler state compounds into further issues depending on how the value is consumed. The primary consequence of this bug is that bytes in the host's address space can be stored/read from. This is only applicable to the 16 bytes before linear memory, however, as the only significant return value of table.grow that can be misinterpreted is -1. The bytes before linear memory are, by default, unmapped memory. Wasmtime will detect this fault and abort the process, however, because wasm should not be able to access these bytes. Overall this this bug in Winch represents a DoS vector by crashing the host process, a correctness issue within Winch, and a possible leak of up to 16-bytes before linear memory. Wasmtime's default compiler is Cranelift, not Winch, and Wasmtime's default settings are to place guard pages before linear memory. This means that Wasmtime's default configuration is not affected by this issue, and when explicitly choosing Winch Wasmtime's otherwise default configuration leads to a DoS. Disabling guard pages before linear memory is required to possibly leak up to 16-bytes of host data. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1.

Wasmtime is a runtime for WebAssembly. From 25.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime's Winch compiler contains a vulnerability where the compilation of the table.fill instruction can result in a host panic. This means that a valid guest can be compiled with Winch, on any architecture, and cause the host to panic. This represents a denial-of-service vulnerability in Wasmtime due to guests being able to trigger a panic. The specific issue is that a historical refactoring changed how compiled code referenced tables within the table.* instructions. This refactoring forgot to update the Winch code paths associated as well, meaning that Winch was using the wrong indexing scheme. Due to the feature support of Winch the only problem that can result is tables being mixed up or nonexistent tables being used, meaning that the guest is limited to panicking the host (using a nonexistent table), or executing spec-incorrect behavior and modifying the wrong table. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1.

Wasmtime is a runtime for WebAssembly. Prior to 24.0.7, 36.0.7, 42.0.2, and 43.0.1, On x86-64 platforms with SSE3 disabled Wasmtime's compilation of the f64x2.splat WebAssembly instruction with Cranelift may load 8 more bytes than is necessary. When signals-based-traps are disabled this can result in a uncaught segfault due to loading from unmapped guard pages. With guard pages disabled it's possible for out-of-sandbox data to be loaded, but this data is not visible to WebAssembly guests. This vulnerability is fixed in 24.0.7, 36.0.7, 42.0.2, and 43.0.1.

Wasmtime is a runtime for WebAssembly. From 28.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime's implementation of its pooling allocator contains a bug where in certain configurations the contents of linear memory can be leaked from one instance to the next. The implementation of resetting the virtual memory permissions for linear memory used the wrong predicate to determine if resetting was necessary, where the compilation process used a different predicate. This divergence meant that the pooling allocator incorrectly deduced at runtime that resetting virtual memory permissions was not necessary while compile-time determine that virtual memory could be relied upon. The pooling allocator must be in use, Config::memory_guard_size configuration option must be 0, Config::memory_reservation configuration must be less than 4GiB, and pooling allocator must be configured with max_memory_size the same as the memory_reservation value in order to exploit this vulnerability. If all of these conditions are applicable then when a linear memory is reused the VM permissions of the previous iteration are not reset. This means that the compiled code, which is assuming out-of-bounds loads will segfault, will not actually segfault and can read the previous contents of linear memory if it was previously mapped. This represents a data leakage vulnerability between guest WebAssembly instances which breaks WebAssembly's semantics and additionally breaks the sandbox that Wasmtime provides. Wasmtime is not vulnerable to this issue with its default settings, nor with the default settings of the pooling allocator, but embeddings are still allowed to configure these values to cause this vulnerability. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1.

Wasmtime is a runtime for WebAssembly. Prior to 24.0.7, 36.0.7, 42.0.2, and 43.0.1, Wasmtime's implementation of transcoding strings between components contains a bug where the return value of a guest component's realloc is not validated before the host attempts to write through the pointer. This enables a guest to cause the host to write arbitrary transcoded string bytes to an arbitrary location up to 4GiB away from the base of linear memory. These writes on the host could hit unmapped memory or could corrupt host data structures depending on Wasmtime's configuration. Wasmtime by default reserves 4GiB of virtual memory for a guest's linear memory meaning that this bug will by default on hosts cause the host to hit unmapped memory and abort the process due to an unhandled fault. Wasmtime can be configured, however, to reserve less memory for a guest and to remove all guard pages, so some configurations of Wasmtime may lead to corruption of data outside of a guest's linear memory, such as host data structures or other guests's linear memories. This vulnerability is fixed in 24.0.7, 36.0.7, 42.0.2, and 43.0.1.

Wasmtime is a runtime for WebAssembly. From 25.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime's Winch compiler contains a bug where a 64-bit table, part of the memory64 proposal of WebAssembly, incorrectly translated the table.size instruction. This bug could lead to disclosing data on the host's stack to WebAssembly guests. The host's stack can possibly contain sensitive data related to other host-originating operations which is not intended to be disclosed to guests. This bug specifically arose from a mistake where the return value of table.size was statically typed as a 32-bit integer, as opposed to consulting the table's index type to see how large the returned register could be. When combined with details about Wnich's ABI, such as multi-value returns, this can be combined to read stack data from the host, within a guest. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1.

Wasmtime is a runtime for WebAssembly. Prior to 24.0.7, 36.0.7, 42.0.2, and 43.0.1, Wasmtime contains a vulnerability where when transcoding a UTF-16 string to the latin1+utf16 component-model encoding it would incorrectly validate the byte length of the input string when performing a bounds check. Specifically the number of code units were checked instead of the byte length, which is twice the size of the code units. This vulnerability can cause the host to read beyond the end of a WebAssembly's linear memory in an attempt to transcode nonexistent bytes. In Wasmtime's default configuration this will read unmapped memory on a guard page, terminating the process with a segfault. Wasmtime can be configured, however, without guard pages which would mean that host memory beyond the end of linear memory may be read and interpreted as UTF-16. A host segfault is a denial-of-service vulnerability in Wasmtime, and possibly being able to read beyond the end of linear memory is additionally a vulnerability. Note that reading beyond the end of linear memory requires nonstandard configuration of Wasmtime, specifically with guard pages disabled. This vulnerability is fixed in 24.0.7, 36.0.7, 42.0.2, and 43.0.1.

Wasmtime is a runtime for WebAssembly. In 43.0.0, cloning a wasmtime::Linker is unsound and can result in use-after-free bugs. This bug is not controllable by guest Wasm programs. It can only be triggered by a specific sequence of embedder API calls made by the host. Specifically, the following steps must occur to trigger the bug clone a wasmtime::Linker, drop the original linker instance, use the new, cloned linker instance, resulting in a use-after-free. This vulnerability is fixed in 43.0.1.

Wasmtime is a runtime for WebAssembly. Prior to 24.0.7, 36.0.7, 42.0.2, and 43.0.1, Wasmtime's implementation of transcoding strings into the Component Model's utf16 or latin1+utf16 encodings improperly verified the alignment of reallocated strings. This meant that unaligned pointers could be passed to the host for transcoding which would trigger a host panic. This panic is possible to trigger from malicious guests which transfer very specific strings across components with specific addresses. Host panics are considered a DoS vector in Wasmtime as the panic conditions are controlled by the guest in this situation. This vulnerability is fixed in 24.0.7, 36.0.7, 42.0.2, and 43.0.1.