In the Linux kernel, the following vulnerability has been resolved: mtd: virt_concat: fix use-after-free in mtd_virt_concat_destroy_joins() mtd_concat_destroy() frees item->concat so calling mtd_virt_concat_put_mtd_devices(item->concat) leads to a use after free. Fix this by moving mtd_virt_concat_put_mtd_devices() before mtd_concat_destroy()

In the Linux kernel, the following vulnerability has been resolved: libceph: Reject monmaps advertising zero monitors A message of type CEPH_MSG_MON_MAP contains a monmap that is sent from a monitor to the client. This monmap contains information about the existing monitors in the cluster. Currently, a monmap indicating that there are zero monitors in the cluster is treated as valid. However, it is impossible to have zero monitors in the cluster and still receive a valid monmap from a monitor. Therefore, such a monmap must be corrupted and should be treated as invalid. Furthermore, a monmap with a monitor count of zero can subsequently crash the client when attempting to open a session with a monitor in __open_session(). This happens because the "BUG_ON(monc->monmap->num_mon < 1)" assertion in pick_new_mon() is triggered. This patch extends a check in ceph_monmap_decode() to also reject arriving mon_maps with num_mon == 0 rather than only with num_mon > CEPH_MAX_MON. [ idryomov: drop "log output for unusual values of num_mon" part ]

A path traversal vulnerability in mustafaakin/cast-localvideo (all versions) allows an unauthenticated remote attacker to read arbitrary files from the server. The app.js handler at lines 151-153 passes the user-supplied req.body.dir parameter directly to res.sendFile() without sanitization, enabling directory traversal via absolute paths or ../ sequences to read sensitive system files.

In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: fix 802.1X-SHA256 call trace warning Based on wpa_auth as 1x_256 mode, need to set up "use_fwsup" with BRCMF_PROFILE_FWSUP_1X. Or it will happen trace warning when call brcmf_cfg80211_set_pmk(). [ 4481.831101] ------------[ cut here ]------------ [ 4481.831102] WARNING: CPU: 1 PID: 2997 at drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:7242 brcmf_cfg80211_set_pmk+0x77/0xd0 [brcmfmac] [...] [ 4481.831202] Call Trace: [ 4481.831204]  <TASK> [ 4481.831205]  nl80211_set_pmk+0x183/0x250 [cfg80211] [ 4481.831233]  genl_family_rcv_msg_doit+0xea/0x150 [ 4481.831237]  genl_rcv_msg+0x104/0x240 [ 4481.831239]  ? cfg80211_probe_status+0x2c0/0x2c0 [cfg80211] [ 4481.831257]  ? genl_family_rcv_msg_doit+0x150/0x150 [ 4481.831259]  netlink_rcv_skb+0x4e/0x100 [ 4481.831261]  genl_rcv+0x24/0x40 [ 4481.831262]  netlink_unicast+0x236/0x380 [ 4481.831264]  netlink_sendmsg+0x250/0x4b0 [ 4481.831266]  sock_sendmsg+0x5c/0x70 [ 4481.831269]  ____sys_sendmsg+0x236/0x2b0 [ 4481.831271]  ? copy_msghdr_from_user+0x6d/0xa0 [ 4481.831272]  ___sys_sendmsg+0x86/0xd0 [ 4481.831274]  ? avc_has_perm+0x8c/0x1a0 [ 4481.831276]  ? preempt_count_add+0x6a/0xa0 [ 4481.831279]  ? sock_has_perm+0x82/0xa0 [ 4481.831280]  __sys_sendmsg+0x57/0xa0 [ 4481.831282]  do_syscall_64+0x38/0x90 [ 4481.831284]  entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 4481.831286] RIP: 0033:0x7fd270d369b4

In the Linux kernel, the following vulnerability has been resolved: idpf: fix max_vport related crash on allocation error during init Set adapter->max_vports only after successful allocation of vports, netdevs and vport_config buffers. This fixes possible crashes on reset or rmmod, following failed allocation on init [ 305.981402] idpf 0000:83:00.0: enabling device (0100 -> 0102) [ 305.994464] idpf 0000:83:00.0: Device HW Reset initiated [ 320.416872] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 320.416918] #PF: supervisor read access in kernel mode [ 320.416942] #PF: error_code(0x0000) - not-present page [ 320.416963] PGD 2099657067 P4D 0 [ 320.416983] Oops: Oops: 0000 [#1] SMP NOPTI ... [ 320.417093] RIP: 0010:idpf_remove+0x118/0x200 [idpf] [ 320.417130] Code: 8b bb 98 09 00 00 e8 17 0f 5b e5 48 8b bb e8 08 00 00 e8 0b 0f 5b e5 66 83 bb 28 06 00 00 00 48 8b bb 20 06 00 00 74 49 31 ed <48> 8b 04 ef 48 85 c0 74 2f 48 8b 78 20 e8 66 58 91 e5 48 8b 83 20 [ 320.417183] RSP: 0018:ff7322212903fdb8 EFLAGS: 00010246 [ 320.417205] RAX: 0000000000000000 RBX: ff4463de40300000 RCX: ff7322212903fd4c [ 320.417228] RDX: 0000000000000001 RSI: ffffffffa7f7d100 RDI: 0000000000000000 [ 320.417250] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 [ 320.417272] R10: 0000000000000001 R11: ff4463de3a638f58 R12: ff4463be89ac7000 [ 320.417294] R13: ff4463be89ac7198 R14: ff4463be94fc7198 R15: ffffffffc0f10f20 [ 320.417317] FS: 00007f963c0e6740(0000) GS:ff4463fdd65d8000(0000) knlGS:0000000000000000 [ 320.417342] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 320.417362] CR2: 0000000000000000 CR3: 00000020ba674002 CR4: 0000000000773ef0 [ 320.417385] PKRU: 55555554 [ 320.417398] Call Trace: [ 320.417412] <TASK> [ 320.417429] pci_device_remove+0x42/0xb0 [ 320.417459] device_release_driver_internal+0x1a9/0x210 [ 320.417492] driver_detach+0x4b/0x90 [ 320.417516] bus_remove_driver+0x70/0x100 [ 320.417539] pci_unregister_driver+0x2e/0xb0 [ 320.417564] __do_sys_delete_module.constprop.0+0x190/0x2f0 [ 320.417592] ? kmem_cache_free+0x31e/0x550 [ 320.417619] ? lockdep_hardirqs_on_prepare+0xde/0x190 [ 320.417644] ? do_syscall_64+0x38/0x6b0 [ 320.417665] do_syscall_64+0xc8/0x6b0 [ 320.417683] ? clear_bhb_loop+0x30/0x80 [ 320.417706] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 320.417727] RIP: 0033:0x7f963bb30beb

In the Linux kernel, the following vulnerability has been resolved: net/sched: serialize qdisc_rtab_list against concurrent get/put qdisc_get_rtab() and qdisc_put_rtab() mutate the process-global singly linked list qdisc_rtab_list and a plain non-atomic 'int refcnt' with no lock. This was only safe because every caller historically held the RTNL mutex, which serialized all rate-table lookups, inserts and frees. That invariant no longer holds. cls_flower sets TCF_PROTO_OPS_DOIT_UNLOCKED, so tc_new_tfilter() keeps rtnl_held == false for it and sets TCA_ACT_FLAGS_NO_RTNL. That flag propagates through tcf_exts_validate_ex() -> tcf_action_init() -> tcf_action_init_1() -> tcf_police_init(), which calls qdisc_get_rtab()/qdisc_put_rtab() with the RTNL mutex NOT held. Two RTM_NEWTFILTER requests on different CPUs, each adding a flower filter with a police action carrying the same rate, then race on qdisc_rtab_list and on the non-atomic refcnt, leading to a use-after-free / double-free of the kmalloc-2k struct qdisc_rate_table. qdisc_rtab_list is a single global (not per-netns), so the corrupted object is shared system-wide. BUG: KASAN: slab-use-after-free in qdisc_put_rtab+0x12f/0x160 qdisc_put_rtab+0x12f/0x160 tcf_police_init+0xda9/0x1590 tcf_action_init_1+0x460/0x6b0 tcf_action_init+0x439/0xa40 tcf_exts_validate_ex+0x42d/0x550 fl_change+0xddd/0x7da0 tc_new_tfilter+0xaa7/0x2420 rtnetlink_rcv_msg+0x95e/0xe90 which belongs to the cache kmalloc-2k of size 2048 Protect qdisc_rtab_list and the refcount with a dedicated spinlock. The (sleeping, GFP_KERNEL) allocation in qdisc_get_rtab() is performed before taking the lock; if a concurrent inserter added an identical table in the meantime the freshly allocated one is freed under the lock, so no duplicate is leaked. qdisc_put_rtab() now decrements the refcount and unlinks under the same lock.

A missing authentication vulnerability in dulldusk/phpfm through 1.8.0 allows an unauthenticated remote attacker to access the full file manager functionality including reading, writing, deleting, and uploading files anywhere on the server filesystem.

In the Linux kernel, the following vulnerability has been resolved: media: cx23885: add ioremap return check and cleanup Add a check for the return value of pci_ioremap_bar() in cx23885_dev_setup(). If ioremap for BAR0 fails, release the already allocated PCI memory region, decrement the device count, and return -ENODEV. This prevents a potential null pointer dereference and ensures proper cleanup on memory mapping failure.

In the Linux kernel, the following vulnerability has been resolved: arm64: syscall: Ensure saved x0 is kept in-sync with tracer updates When seccomp support was originally added to arm64 in a1ae65b21941 ("arm64: add seccomp support"), seccomp was erroneously called _before_ the ptrace syscall-enter-stop and therefore the tracer could trivially manipulate the syscall register state after the seccomp check had passed. This was subsequently fixed in a5cd110cb836 ("arm64/ptrace: run seccomp after ptrace") by moving the seccomp check after the tracer has run. Unfortunately, a decade later, that fix has been reported to be incomplete. On arm64, both the first argument to a syscall and its eventual return value are allocated to register x0. In order to facilitate syscall restarting and querying of syscall arguments on the syscall exit path, the original value of x0 is stashed in 'struct pt_regs::orig_x0' early during the syscall entry path and is returned for the first argument by syscall_get_arguments(). Unlike 32-bit Arm, this stashed value is not directly exposed via ptrace() and so changes to register x0 made by the tracer on a syscall-enter-stop are not reflected in 'orig_x0'. This means that seccomp, syscall tracepoints and audit can observe a stale value for the register compared to the argument that will be observed by the actual syscall. Re-sync 'orig_x0' from x0 on the syscall entry path following a potential ptrace stop (i.e. PTRACE_EVENTMSG_SYSCALL_ENTRY or SECCOMP_RET_TRACE). This behaviour is limited to native tasks (because compat tasks expose 'orig_r0' to ptrace) where the syscall is not being skipped (because x0 is updated to hold the return value of -ENOSYS in that case).

The Autopay WordPress plugin before 5.0.1 does not perform any capability or nonce check before saving a styling option from a public request, and does not escape that value when it is later output on the checkout page, allowing unauthenticated attackers to store JavaScript that executes in the browser of any user, including administrators, who loads the checkout page.