In the Linux kernel, the following vulnerability has been resolved: hwmon: occ: validate poll response sensor blocks The OCC poll response parser walks a counted list of sensor data blocks. It used the static backing-array capacity as the parse boundary, but a transport response makes only data_length bytes current and valid. A truncated response can therefore make the parser consume a block header or block extent outside the current response. Use data_length as the parent boundary, prove the fixed poll header and each current block header before reading them, and prove the complete block before advancing. Keep parsed sensor metadata local until the complete response has passed validation, then publish it. Propagate malformed-response errors before publishing the OCC as active.

In the Linux kernel, the following vulnerability has been resolved: net/iucv: fix use-after-free of a severed iucv_path af_iucv queues not-yet-received message notifications on iucv->message_q, each holding a raw pointer to the connection's iucv_path. When the peer severs the connection, iucv_sever_path() frees that path with iucv_path_free() but leaves the notifications queued. A later recvmsg() drains message_q via iucv_process_message_q() and hands the stale path to message_receive() -- a use-after-free of the freed iucv_path. Drop the queued notifications when the path is severed; once the path is gone they can no longer be received. This also frees the notifications leaked when a socket is closed with messages still queued.

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211_hwsim: clamp virtio RX length before skb_put hwsim_virtio_rx_work() passes the virtqueue used-ring length reported by the device straight to skb_put() on a fixed-size receive skb. A backend reporting a length larger than the skb tailroom drives skb_put() past the buffer end and hits skb_over_panic() -- a host-triggerable guest panic (denial of service). Clamp the length to the skb's available room before skb_put(). A conforming device never reports more than the posted buffer size, so valid frames are unaffected; a truncated over-report then fails the length/header checks in hwsim_virtio_handle_cmd() and is dropped, so truncating rather than dropping here cannot be turned into a parsing problem.

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: connac: fix possible NULL-pointer deref in mt76_connac_mcu_uni_bss_he_tlv() mt76_connac_get_he_phy_cap routine can theoretically return NULL so check cap pointer before dereferencing it.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: pin conn during async oplock break notification smb2_oplock_break_noti() and smb2_lease_break_noti() store a ksmbd_conn pointer in an async ksmbd_work and then queue that work on ksmbd-io. The work only increments conn->r_count, which prevents teardown from passing the pending-request wait after the increment, but it does not pin the struct ksmbd_conn object. If connection teardown races with an oplock break notification, the last conn reference can be dropped before the queued worker finishes. The worker then uses the freed conn in ksmbd_conn_write() and ksmbd_conn_r_count_dec(). Take a real conn reference when publishing the conn pointer to the async work item, and drop it after the notification work has decremented r_count. Apply the same lifetime rule to lease break notification, which uses the same work->conn pattern.

In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Bound the early ACPI HID map The ivrs_acpihid command-line parser appends entries to a fixed four-element early_acpihid_map array. Unlike the sibling IOAPIC and HPET parsers, it does not reject a fifth entry before incrementing the map size. Check the capacity at the common found label before parsing the HID and UID or writing the entry.

In the Linux kernel, the following vulnerability has been resolved: drm/imagination: Count paired job fence as dependency in prepare_job() The DRM scheduler's prepare_job() callback counts the remaining non-signaled native dependencies for a job, preventing job submission until those (plus job data and fence update) can fit in the job queue's CCCB. This means checking which dependencies can be waited upon in the firmware, i.e. whether they are backed by a UFO object, i.e. whether their drm_sched_fence::parent has been assigned to a pvr_queue_fence::base fence. That happens when the job owning the fence is submitted to the firmware. Paired geometry and fragment jobs are submitted at the same time, which means the dependency between them can't be checked this way before submission. Update job_count_remaining_native_deps() to take into account the dependency between paired jobs. This fixes cases where prepare_job() underestimated the space left in an almost full fragment CCCB, wrongly unblocking run_job(), which then returned early without writing the full sequence of commands to the CCCB. The above lead to kernel warnings such as the following and potentially job timeouts (depending on waiters on the missing commands): [ 375.702979] WARNING: drivers/gpu/drm/imagination/pvr_cccb.c:178 at pvr_cccb_write_command_with_header+0x2c4/0x330 [powervr], CPU#1: kworker/u16:3/47 [ 375.703160] Modules linked in: [ 375.703571] CPU: 1 UID: 0 PID: 47 Comm: kworker/u16:3 Tainted: G W 7.0.0-rc2-g817eb6b11ad5 #40 PREEMPT [ 375.703613] Tainted: [W]=WARN [ 375.703627] Hardware name: Texas Instruments AM625 SK (DT) [ 375.703645] Workqueue: powervr-sched drm_sched_run_job_work [gpu_sched] [ 375.703741] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 375.703764] pc : pvr_cccb_write_command_with_header+0x2c4/0x330 [powervr] [ 375.703847] lr : pvr_queue_submit_job_to_cccb+0x578/0xa70 [powervr] [ 375.703921] sp : ffff800084a97650 [ 375.703934] x29: ffff800084a97740 x28: 0000000000000958 x27: ffff80008565d000 [ 375.703979] x26: 0000000000000030 x25: ffff800084a97680 x24: 0000000000001000 [ 375.704017] x23: ffff800084a97820 x22: 1ffff00010952ecc x21: 0000000000000008 [ 375.704056] x20: 00000000000006a8 x19: ffff00002ff7da88 x18: 0000000000000000 [ 375.704093] x17: 0000000020020000 x16: 0000000000020000 x15: 0000000000000000 [ 375.704132] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 [ 375.704168] x11: 000000000000f2f2 x10: 00000000f3000000 x9 : 00000000f3f3f3f3 [ 375.704206] x8 : 00000000f2f2f200 x7 : ffff700010952ecc x6 : 0000000000000008 [ 375.704243] x5 : 0000000000000000 x4 : 1ffff00010acba00 x3 : 0000000000000000 [ 375.704279] x2 : 0000000000000007 x1 : 0000000000000fff x0 : 000000000000002f [ 375.704317] Call trace: [ 375.704331] pvr_cccb_write_command_with_header+0x2c4/0x330 [powervr] (P) [ 375.704411] pvr_queue_submit_job_to_cccb+0x578/0xa70 [powervr] [ 375.704487] pvr_queue_run_job+0x3a4/0x990 [powervr] [ 375.704562] drm_sched_run_job_work+0x580/0xd48 [gpu_sched] [ 375.704623] process_one_work+0x520/0x1288 [ 375.704658] worker_thread+0x3f0/0xb3c [ 375.704680] kthread+0x334/0x3d8 [ 375.704706] ret_from_fork+0x10/0x20 [ 375.704736] ---[ end trace 0000000000000000 ]---

Dokploy is a free, self-hostable Platform as a Service (PaaS). From 0.29.3 until 0.29.13, the incomplete fix for CVE-2026-45628 leaves packages/server/src/db/schema/compose.ts branch fields without server-side validation, allowing a direct compose.update request to store a malicious customGitBranch, branch, gitlabBranch, bitbucketBranch, or giteaBranch. A low-privileged authenticated user can trigger compose.deploy, which passes the stored branch to shell-based Git clone commands in packages/server/src/utils/providers/git.ts, github.ts, gitlab.ts, bitbucket.ts, and gitea.ts, resulting in arbitrary host command execution. This issue is fixed in version 0.29.13.

None

In the Linux kernel, the following vulnerability has been resolved: comedi: comedi_parport: deal with premature interrupt Syzbot reported a general protection fault in `comedi_get_is_subdevice_running()`, which was called from the interrupt handler `parport_interrupt()` in the "comedi_parport" driver, but it does not currently have a C reproducer for the problem. It's probably due to a premature interrupt for one of two reasons: 1. The driver sets up the interrupt handler before the comedi subdevices used by the interrupt handler have been allocated, but does not disable the interrupt in the parallel port's CTRL register first. 2. The driver uses a user-supplied I/O port base address which Syzbot would have supplied, but it might not be backed by real parallel port hardware. Change the initialization order in the driver's comedi "attach" handler (`parport_attach()`) so that the hardware registers are initialized before the interrupt handler is requested. This should prevent premature interrupts occurring for real hardware. Also add a test to the interrupt handler to ensure the comedi device is fully attached and return early if it isn't.